Concrete cutting in Columbus NE - clean openings right where you need them
Need a drain line, an opening or a section cut out of your slab or wall? We make clean, straight cuts where you want them.
- Licensed and fully insured.
- Free estimates at your property.
- We respond within 1 business day.
The kinds of concrete cutting we do
Flat sawing for slabs
A walk-behind saw makes straight cuts across driveways, patios, garage floors and basement slabs, when you need a section out, a trench for a line or a clean edge.
Wall sawing for openings
A saw that runs on a track cuts upright concrete like foundation walls, so you get a clean edge for a door, a window or a passage.
Core drilling for pipes
A drill with a round bit cuts neat holes through slabs and walls for pipe, drains and conduit, without breaking up the concrete around the hole.
What does a concrete cutting job in Columbus involve?
Concrete cutting in Columbus, NE means sawing straight lines through a slab, cutting an opening in a wall or drilling round holes for pipe, drains and conduit, so you get a clean edge instead of a broken one.
Most cutting calls start with something new going in, like a drain line under a basement floor, a bigger window in a foundation wall, or a cracked section of driveway that has to come out before the next pour. The price moves with how thick the concrete is, how much steel is in it, whether the cut is on a slab or a wall, indoors or out, and whether we're breaking up and hauling the pieces. The schedule mostly turns on what has to happen first, like a permit, a scan or a utility locate. I'll give you your own number once I've seen the job, in a written estimate that lists what's included.
Concrete cutting, from scanning to haul-off
Before I price a cut, I ask where it goes, how thick the concrete is and whether we're hauling the pieces off, because removal can be a big part of the job.
Marking where it goes
We mark the cut lines with you, so the opening, trench or hole lands where your window, drain or new pour needs it.
Scanning structural concrete
On a structural slab or wall, we talk about scanning for steel rods, tensioned cables, pipes and conduit, because finding them beats cutting into them.
Cutting with the right saw
We match the saw or core drill to the concrete's thickness and steel, and keep water and dust under control as we cut.
Breaking out and hauling
We break out and haul off the pieces when that's in the job, leaving a clean edge for a new driveway or patio pour.
Why people in Columbus call Columbus Concrete
I started out doing side jobs for neighbors and turned it into a full-time business in Columbus in 2023. We're known for getting the ground work right before any concrete shows up, and on a cutting job that means asking the right questions before the saw starts.
I look at every job myself
I measure the cut and write the estimate myself, and I'm on site with our crew when we make it, so nothing gets lost between the quote and the saw.
Licensed and fully insured on every cut
We're licensed and fully insured, which counts on cutting work, where a saw runs close to foundation walls, buried lines and the steel holding a slab together.
Removal and scanning settled up front
I want you to know what you're paying for before we start, so hauling, breaking out and any scanning get talked through at the estimate, not added after.
What happens when you call about concrete cutting in Columbus?
We plan each cut around what comes next on your project, whether that's a new pipe, a basement window or a fresh pour, and around how you use the space while we work.
or call (531) 400-9011
You call us
Call (531) 400-9011 or send the form and tell us what needs cutting, so I know what I'm looking at before I come out.
I come out and measure
I come out myself to look at the job, measure the cut and ask how you plan to use the space, so the method fits.
Your written estimate
You get a written estimate that lists what's included, like hauling. When we cut, I'm on site with our crew, and we walk the job with you after.
Get a free on-site estimate from Columbus Concrete
Tell us where the cut is, whether it's a slab or a wall, indoors or out, and whether the pieces need hauling off. We reply within one business day to set up a free on-site estimate, and there's no obligation.
Questions about cutting concrete
How much does concrete saw cutting cost in Columbus NE?
Across the US, professional saw cutting of an accessible 4- to 6-inch slab usually runs about $4 to $10 per linear foot, and that's the market's range, not our price. On a small job, a minimum charge or the cost of bringing the crew and equipment out can outweigh the per-foot rate. Your written estimate gives you your own figure.
Does the price of concrete cutting include hauling the concrete away?
Not always, because sawing and removal are separate jobs, and some cutters make the cut lines and leave the panels in place. Breaking up, hauling and disposal can cost more than the sawing itself, so ask whether removal is in the price before you compare quotes.
How do I know which concrete cutting method my job needs?
The thickness of the concrete, how much steel is in it and where the cut is decide the tool. Hand saws reach tight spots and small openings, while wire saws handle thick or heavily reinforced sections, so describing your concrete clearly gets you a better quote.
What is the best way to cut concrete inside a basement or garage?
Indoor cutting is done with electric, hydraulic or air-powered equipment, along with water control, slurry recovery, ventilation, barriers or dust extraction. Those steps are part of the work, not upgrades, which is why indoor cutting usually costs more than the same cut outside.
Is there a permit for cutting an egress window in Columbus NE?
Yes, the city's permit list includes a residential egress window permit, and it calls for a detailed construction plan. The Building Inspector may ask for more documents depending on the scope of the work, so it helps to have that lined up before the cutting date.
Do concrete contractors have to be registered in Nebraska?
Yes, Nebraska requires contractors and subcontractors to register with the state Department of Labor before doing construction work. The department says registration doesn't ensure quality of work or protect against fraud, so a written estimate that spells out the work still matters.
Work that often follows a cut
Concrete driveway building
Once a cracked or sunken section is cut out, a new driveway pour on a packed base gives you a surface that sits level with the rest.
Explore Concrete driveway buildingConcrete patio construction
If you're cutting out an old patio or adding onto one, we can pour the new slab on a dug-out, packed base so it's less likely to settle.
Explore Concrete patio constructionConcrete floor installation
After a trench is cut for a new drain or plumbing line, the floor has to be poured back level and tied into the slab around it.
Explore Concrete floor installation
Before concrete cutting starts in Columbus
Permits in Columbus and the two miles around it go through the city's Community Development Department. Its permit list names a residential egress window permit, but whether other cutting needs a permit depends on the job, so before we start I check with the city about yours, and if a permit is needed we help you get it lined up so the paperwork doesn't hold up the work.
A lot of cuts lead to digging, like a trench for a drain line or a hole for a basement window well, and Nebraska law says anyone digging has to place a free locate request with Nebraska 811 at least two full business days ahead. Utilities won't mark privately owned lines, such as a line out to a shop or a yard light, so finding those is on the property owner. We see the same mix of older basements and newer slabs on jobs in Columbus and Schuyler, and we work in other cities around the area too, so give us a call if you're not sure we cover your place.